Testing Purposes definition

Testing Purposes means purposes of evaluation and testing of the capabilities of the Software or Supplemental Materials but excludes any production with the Software or Supplemental Materials, competitive analysis and any commercial, professional, or other for-profit purposes.
Sample 1Sample 2Sample 3
Testing Purposes means the usage of the SIM Cards within the Customer’s own test devices solely for the purpose of the Customer’s evaluation of the Services.
Sample 1

Examples of Testing Purposes in a sentence

  • It has been accepted for inclusion in Licensure Testing: Purposes, Procedures, and Practices by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln.

  • Furthermore, meaningful partial correlations were found between Workload and General work stress and Role Ambiguity and General Work Stress, suggesting that these two scales could possibly be the best predictors of General work stress (De Bruin & Taylor, 2005).

  • The following information shall be provided by Supplier to AT&T prior to any planned maintenance: • Release Notes and Documentation (must be provided [* * *] prior to planned release) • Access to Staging Environment for AT&T Testing Purposes • Roll Back Plan If AT&T has not responded to change management plan within the [* * *] notification period, Supplier may proceed with the planned maintenance with no further notification to AT&T.

  • Referenced Documents 2.1 MDOT Standards: Standard Specifications for Construction 2.2 ASTM Standard: E 11 Specification for Wire Cloth Sieves for Testing Purposes 3.

  • Standard Specification for Wire Cloth and Sieves for Testing Purposes" (DoD adopted).

  • The sieves shall conform to the requirements of MT 405, Wire Cloth Sieves for Testing Purposes.

  • AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ASTM C 602 Agricultural Liming Materials ASTM E 11 Wire-Cloth Sieves for Testing Purposes COMMERCIAL ITEM DESCRIPTIONS (CID)CID A-A-1909 Fertilizer NORTH CAROLINA DEPARTMENT OF TRANSPORTATION STD.

  • All sieves shall conform to the requirements of the Specification for Sieves for Testing Purposes, ASTM Designation E-11.

  • The following information shall be provided by Supplier to AT&T prior to release: • Release Notes and Documentation (must be provided [* * *] prior to planned release) • Training • Access to Staging Environment for AT&T Testing Purposes • Roll Back Plan If AT&T has not responded to change management plan within the [* * *] of the notification period, Supplier shall escalate to the points of contact noted below.

  • Method for Sieve Analysis of Fine and Course Aggregates..3 ASTM C 698-98, Test Method for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Oxides ((U,Pu)02)..4 ASTM c902-99B, Specifications for Pedestrian and Light Traffic Paving Brick..5 ASTM D 698-9 1 (1998), Test Method for Laboratory Compaction Characteristics of Soil Using Standard Effort (600kN-m/m3)..6 ASTM E 11-95, Specifications for Wire-Cloth Sieves for Testing Purposes.

Related to Testing Purposes

  • Production Purposes means using the Software (a) in a production environment, (b) generally using live data and/or applications for a purpose other than Development Purposes, (c) for multi-user prototyping, quality assurance and testing and/or (d) for backup instances.

  • School operating purposes means the purposes included in the operation costs of the district as prescribed in sections 7 and 18 and purposes authorized under section 1211 of the revised school code, MCL 380.1211.

  • Project Purposes means the use of Protected Information strictly and only for purposes related to Recipient’s and its Related Parties’ participation and involvement in the Project, and only for such period of time during which Recipient and its Related Parties are involved in Project related activities.

  • Approved Purposes means the use of Data by the Provider for the purposes of providing services authorized by APS in Agreements entered into between APS and the Provider (“Authorized Services”) during the term of the SDUPA., and for no other purpose.

  • Common Purposes shall include the purposes of managing and maintaining the Premises, the Buildings and in particular the Common Portions, rendition of services in common to the Unit Owners, collection and disbursement of the Common Expenses and dealing with the matters of common interest of the Unit Owners and relating to their mutual rights and obligations for the beneficial use and enjoyment of their respective Units exclusively and the Common Portions in common.

  • Business Purposes ’ means purposes normally or otherwise reasonably associ- ated with the use of land for business activities, including shops, offices, showrooms, restaurants or similar businesses other than places of instruction, public garages, builder’s yards, scrap yards and industrial activities;

  • Approved Purpose means the purpose or purposes set out in item 1 of Schedule 1.

  • Development Purposes means using the Software for the specific purpose of (a) developing, (b) single-user prototyping, quality assurance or testing and/or

  • Primary Purpose means the collection, use, or disclosure of information collected by the Cooperative or supplied by the Member-consumer where there is an authorized business need or emergency response in order to: (1) provide, bill, or collect for, regulated electric or natural gas service; (2) provide for system, grid, or operational needs; (3) provide services as required by state or federal law or as specifically authorized in the Cooperative’s approved tariff or; (4) engage in customer satisfaction surveys, plan, implement, or evaluate, energy assistance, demand response, energy management, renewable energy or energy efficiency programs by the Cooperative or under contract with the Cooperative, under contract with the Commission, or as part of a Commission- authorized program conducted by an entity under the supervision of the Commission, or pursuant to state or federal statutes governing energy assistance.

  • Cost of Services is FASC’s total Operating Costs incurred in providing the applicable Category of Services during the month to all investment advisers for which FASC provides that Category of Services. “Adviser’s Assets under Management” is the total average assets under management for the month for all Accounts or portions thereof for which the Adviser acts as investment adviser or subadvisor and which utilize the Category of Services.

  • Testing Period means a single period consisting of the four consecutive fiscal quarters of the Borrower then last ended (whether or not such quarters are all within the same fiscal year), except that if a particular provision of this Agreement indicates that a Testing Period shall be of a different specified duration, such Testing Period shall consist of the particular fiscal quarter or quarters then last ended that are so indicated in such provision.

  • Secondary Purpose means any purpose that is not a Primary Purpose.

  • School purposes means purposes that customarily take place at the direction of a teacher or the Board, or aid in the administration of school activities, including but not limited to instruction in the classroom, administrative activities and collaboration among students, school personnel or parents or legal guardians of students.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Purposes means the purposes of World Athletics described in Article 2.

  • Testing service means a national testing service selected by the board.

  • Public Purposes means the public purpose of financing $1,500,000.00 of building remodeling and improvement projects, consisting of projects included in the District's 2015-2016 building remodeling and improvement program;

  • Multiple purposes in relation to a property, shall mean the use of a property for more than one purpose.

  • Agreed Purposes as defined in Section 10.14.

  • Manufacturing Cost means ***

  • Educational Purposes means use for the purpose of education, teaching, distance learning, private study and/or research.

  • Testing laboratory means a laboratory, facility, or entity in the state that offers or performs tests of cannabis or cannabis products and that is both of the following:

  • General purpose equipment means equipment, which is not limited to research, medical, scientific or other technical activities. Examples include office equipment and furnishings, modular offices, telephone networks, information technology equipment and systems, air conditioning equipment, reproduction and printing equipment, and motor vehicles.

  • Repeat compliance period means any subsequent compliance period after the initial compliance period.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Business Purpose means the use of personal information for the business’s or a service provider’s operational purposes, or other notified purposes, provided that the use of personal information shall be reasonably necessary and proportionate to achieve the operational purpose for which the personal information was collected or processed or for another operational purpose that is compatible with the context in which the personal information was collected. Business purposes are: