Spare Parts Provisions Sample Clauses
Spare Parts Provisions
SUNDRY PROVISIONS Section 4.1 Subject and subordinate always to the prior rights of the First Mortgagee under the First Mortgage and to the prior rights of the Second Mortgagee under the Second Mortgage, all of the covenants, promises, stipulations and agreements of the Shipowner in this Deed of Covenants contained shall bind the Shipowner and its successors and permitted assigns and shall be binding on and inure to the benefit of the Mortgagee and its successors and permitted assigns. In the event of any assignment of the Mortgage or this Deed of Covenants by the Mortgagee in accordance with the applicable provisions of the Third Lien Indenture, any other Third Lien Note Documents and the Third Lien Intercreditor Agreement, as applicable, the term “Mortgagee” as used in this Deed of Covenants shall be deemed to mean any such successor or permitted assignee. Section 4.2 Wherever and whenever herein any right, power or authority is granted or given to the Mortgagee, such right, power or authority may be exercised in all cases by the Mortgagee or such agent or agents as it may appoint, and the act or acts of such agent or agents when taken shall constitute the act of the Mortgagee hereunder. Section 4.3 (a) In the event that any provision of this Deed of Covenants shall be deemed invalid or unenforceable by reason of any present or future Legal Requirements or any decision of any court of competent jurisdiction, the validity and enforceability of any other provision hereof shall not be affected thereby. Any such invalidity or unenforceability of any provision of this Deed of Covenants in any jurisdiction or nation shall not render such provision invalid or unenforceable under the Legal Requirements of any other jurisdiction or nation.
Final Provisions Clause 16
OPERATIVE PROVISIONS In consideration of the disclosure of Proprietary Information by the Disclosing Party, the Receiving Party hereby agrees: (i) to hold the Proprietary Information in strict confidence and to take all reasonable precautions to protect such Proprietary Information (including, without limitation, all precautions the Receiving Party employs with respect to its own confidential materials), (ii) not to disclose any such Proprietary Information or any information derived therefrom to any third person, (iii) not to make any use whatsoever at any time of such Proprietary Information except to evaluate internally its relationship with the Disclosing Party, and (iv) not to copy or reverse engineer any such Proprietary Information. The Receiving Party shall procure that its employees, agents and sub-contractors to whom Proprietary Information is disclosed or who have access to Proprietary Information sign a nondisclosure or similar agreement in content substantially similar to this Agreement
Flow Down Provisions Grantee must include any applicable provisions of the Contract in all subcontracts based on the scope and magnitude of work to be performed by such Subcontractor. Any necessary terms will be modified appropriately to preserve the State's rights under the Contract.
EEO Provisions During the performance of this Contract the Contractor agrees as follows: (1) The Contractor shall not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. The Contractor shall take affirmative action to insure that applicants are employed and that employees are treated equally during employment, without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. Such action shall include but not be limited to the following: employment, upgrading, demotion, transfer, recruitment or advertising, layoff or termination, rates of pay or other forms of compensation, and selection for training, including apprenticeship. The Contractor shall post in conspicuous places, available to employees and applicants for employment, notices setting forth these EEO provisions. (2) The Contractor shall in all solicitations or advertisement for employees placed by or on behalf of the Contractor, state that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. (3) The Contractor shall send a copy of the EEO provisions to each labor union or representative of workers with which it has a collective bargaining agreement or other contract or understanding. (4) In the event of the Contractor's noncompliance with these EEO provisions, the City may cancel, terminate, or suspend this contract, in whole or in part, and the City may declare the Contractor ineligible for further City contracts. (5) Unless exempted by the City Council of the City of Durham, the Contractor shall include these EEO provisions in every purchase order for goods to be used in performing this contract and in every subcontract related to this contract so that these EEO provisions will be binding upon such subcontractors and vendors.
Administrative Provisions (a) Replies to grievances at Step 2 of the grievance procedure and notification to arbitrate shall be by certified mail, courier or by facsimile. (b) Grievances, replies, and notification shall be deemed to have been presented on the date on which they were verifiably transmitted, and received on the date they were delivered to the appropriate office of the Employer or the Union.
Certain Provisions If the operation of any provision of this Agreement would contravene the provisions of applicable law, or would result in the imposition of general liability on any Limited Partner or Special Limited Partner, such provisions shall be void and ineffectual.
Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.
Leave Provisions Clause No. Title
Charter Provisions Each Seller Entity shall take all necessary action to ensure that the entering into of this Agreement and the consummation of the Merger and the other transactions contemplated hereby do not and will not result in the grant of any rights to any Person under the Articles of Incorporation, Bylaws, or other governing instruments of any Seller Entity or restrict or impair the ability of Buyer or any of its Subsidiaries to vote, or otherwise to exercise the rights of a shareholder with respect to, shares of any Seller Entity that may be directly or indirectly acquired or controlled by them.