Safety Factors Sample Clauses

Safety Factors. The Helicopter, K-9, and Motor positions involve technical skills not required of other Specialty positions. Should these skills which are inherent to the safe operation or control of equipment deteriorate, and future training would not raise these skills to a satisfactory level, an Officer may be removed from these designated positions.
Sample 1Sample 2Sample 3See All (9)
Safety Factors. In the event of risk of personal safety, such as violence or threatened violence on the part of the patient or family, a nurse should withdraw immediately from the situation. If the situation is deemed severe, the police should be notified. If it is not an immediate, threatening situation, the nurse will inform the Supervisor of the incident and the decision to resume or discontinue service will be made as soon as possible by the Nursing Director. The physician is to be notified, as are any other agencies or services associated with the situation, especially if the decision has been made to discharge the patient from service. The precipitating incident as well as the actions and decisions taken, are to be documented and reported to the Executive Director within hours.
Sample 1
Safety Factors. The primary responsibility for personal safety rests with the individual employee. Management has the responsibility to insure that the working conditions are as safe as possible and that all technicians observe safety rules and procedures. All technicians should report violations and hazards as soon as they are noticed and take appropriate actions to correct the unsafe situation. When necessary, no fewer than two employees will be permitted to work in a isolated area without periodic checks being made by the employer. The employee should file the appropriate Service Hazard Report if convinced that the work situation is unsafe.
Sample 1

Related to Safety Factors

  • Safety Objectives 55.1 The Parties recognise the potentially hazardous nature of the construction industry. To this end, the Parties to the Agreement are committed to continuous improvement in occupational health and safety standards through the implementation of an organisational framework which involves all Parties in protecting Employees’ health and safety. 55.2 In meeting these objectives, the Parties have agreed to consider a broad agenda through the consultative processes established by this Agreement. Such an agenda will include: (a) Measures designed to include the safe operation of plant and equipment; (b) Training issues including specific hazards, health and safety systems, and site induction; (c) Management of occupational health and safety through a comprehensive approach which aims to control hazards at their source, reduce the incidence and costs of occupational injuries and illnesses; and (d) Risk of fatigue (see clause 36.5). 55.3 The Employer will comply with all relevant work health and safety legislation, including the OHS Act, workers compensation legislation, regulations, codes of practice and relevant and appropriate Australian and Industry Standards as set out in Appendix F.

  • Safety Boots Each employee, after 3 months’ continuous service, will be reimbursed (on production of a receipt), the cost of one pair of safety boots (approved by the employer), in each year, to a maximum of $110.00. All protective clothing such as wet weather jackets, safety helmets, welding jackets, welding xxxxxxx, welding gauntlets, rubber boots, etc, (which remain the property of the Company), will be supplied on all occasions deemed necessary.

  • Safety Glasses Section 1. The City shall supply prescription safety glasses with plastic lenses to employees who are required to wear safety glasses and who are members of the classifications contained in Appendix C to this contract. Safety glasses which are authorized must be industrial grade safety glasses which meet or exceed the requirements of ANSI Specification Z87. 1. All employees who are required to wear safety glasses shall also be required to wear side xxxxxxx, either permanent or snap-on, whenever an eye hazard exists. Solid tinted glasses will not be approved unless required by prescription. Photogray, progressive, scratch coating and/or anti-glare lenses may be considered for those employees who primarily work outdoors or as prescribed. In the event that additional classes are identified as needing either prescription safety glasses or protective eyewear, such classes may be added to the classification list in Appendix C upon approval of PAGE and the City. Section 2. The City agrees to pay the full cost of required prescription safety glasses, with frames not to exceed $75.00. This excludes the cost of the eye examination which will be the responsibility of the employee. The effected employees will be allowed one (1) replacement of safety glasses every two (2) years. In the event the safety glasses become lost, unserviceable, or broken on the job, the employee must present a written request for replacement to the Department Head and Human Resources Director. If the employee breaks his safety glasses while on the job, the Department shall replace the glasses at no cost to the employee. The replacement of lost glasses or glasses that are broken off the job will be at the discretion of the Department Head and Human Resources Director. If an employee has been provided safety glasses by the City, the employee shall be permitted to retain possession of the glasses after separation from the City without reimbursing the City for any costs associated with the glasses. Section 3. An employee who is required to wear prescription safety glasses must present a written request to his department head or designated representative. Section 4. The employee must obtain a current prescription and the employee is authorized the use of sick leave not to exceed two (2) hours to accomplish this examination. The employee will obtain a purchase order from the Department Head prior to ordering the safety glasses. The employee will present the purchase order to the appropriate vendor when ordering. The vendor will contact the appropriate Department Head when the glasses are ready for delivery. The Department Head will then notify the employee who will present himself at the vendor for fitting and pickup. Section 5. In the event a probationary employee has been issued safety glasses and terminates his employment with the City for any reason during the probationary period, he shall be required to reimburse the City for any expenses incurred in the purchase of safety glasses.

  • Safety Footwear ‌ The Employer will determine the employees that are required to wear safety footwear as essential Personal Protective Equipment (PPE). Those Employer- designated employees within the following classifications will receive a biennial allowance up to $200 per designated employee. The process for purchasing safety footwear will follow the Employer’s policy or practice. • Buildings and Grounds Supervisors • Control Tech • Cooks • Custodians • Electricians and Electrician Leads • Facility Operations Maintenance Specialist • Food Service Workers, Worker Leads, Supervisors and Managers • Grounds & Nursery Services Specialists • HVAC Techs • Maintenance Custodians, Specialists and Mechanics • Painters and Painter Leads • Security Guards; Campus Security Officers, Sergeants and Safety Supervisors • Warehouse Workers and Equipment Operators • Utility Workers ARTICLE 22‌

  • Safety Where an employee is prevented from working at the employee’s particular function as a result of unsafe conditions caused by the inclement weather, the employee may be transferred to other work in the employee’s classification on site, until the unsafe conditions are rectified. Where such alternative is not available and until the unsafe conditions are rectified, the employee shall remain on site. The employee shall be paid for such time without reduction of the employees’ inclement weather entitlement.

  • Safety Shoes 3901 Employees who are required to wear steel-toed safety shoes will receive $200 toward the purchase and/or replacement of these shoes in the first quarter of each year. Any employee out on an authorized leave shall receive payment within thirty days of their return to paid duty. New employees who are required to wear steel- toed safety shoes will receive $200 toward the purchase of shoes in their first paycheck; for employees hired on or after December 1, he/she shall not receive an additional $200 in the first quarter.

  • Power Factor Design Criteria Developer shall design the Large Generating Facility to maintain an effective power delivery at demonstrated maximum net capability at the Point of Interconnection at a power factor within the range established by the Connecting Transmission Owner on a comparable basis, until NYISO has established different requirements that apply to all generators in the New York Control Area on a comparable basis. The Developer shall design and maintain the plant auxiliary systems to operate safely throughout the entire real and reactive power design range. The Connecting Transmission Owner shall not unreasonably restrict or condition the reactive power production or absorption of the Large Generating Facility in accordance with Good Utility Practice.

  • Safety Plan Developer’s safety plan specifically adapted for the Project. Developer's Safety Plan shall comply with all provisions regarding Project safety, including all applicable provisions in these Construction Provisions.

  • Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.

  • Safety Data Sheets If specified by City in the solicitation or otherwise required by this Contract, Contractor must send with each shipment one (1) copy of the Safety Data Sheet (SDS) for each item shipped. Failure to comply with this procedure will be cause for immediate termination of the Contract for violation of safety procedures.